Browse verified opportunities sorted by relevance to your profile.
This mission involves replacing a roller on a Winsdone Pastillator used in wax production. The existing roller is visibly rusty and damaged, as shown ...
This mission involves a safety circuit check on an Atlas Copco Winding machine. The primary issue is that limit switches, visible in Photo 1, have bee...
Troubleshoot an E-stop issue on a Lisec insulating glass machine. The E-stop is not pressed, but the system will not reset. The machine's control pane...
Troubleshoot a recurring fault on a Lisec insulating glass machine where relay K30a trips and cannot be reset. Photo 1 shows relay K30a, part number 5...
This mission involves a drive replacement on a Nordmeccanica laminator. The Siemens Sinamics V20 drive, visible in the control cabinet, frequently dis...
A Nordmeccanica Printing Press on printing line 2004 requires repair of a damaged Arcnet plug. The existing plug is destroyed and needs replacement wi...
This mission involves replacing an encoder on a Nordmeccanica Splicer, a food packaging machine. The existing encoder is visible with its wiring, and ...
The mission involves a PLC S5 to TIA Portal upgrade on an Alfa Laval Pastillator used in the wax industry. The existing setup includes Siemens SIMATIC...
An Alfa Laval Pastillator requires service for a damaged conveyor belt. The belt has ripped at a cut, visible as a vertical tear through a metal belt ...
This mission involves replacing a broken pulley and belt on an Alfa Laval Pastillator. The provided photo shows two pulleys, one with a visible nut an...
This mission involves replacing an old water pump on an Alfa Laval Pastillator in the wax industry. The existing pump and motor show significant rust ...
Service is required on a Brückner extruder, specifically Extrusion Line 7, to address issues with multiple rollers. The rollers are reportedly getting...
This mission involves replacing a motor on a Brückner Extruder, specifically a BOPP line. The new motor, a Siemens compact model, is on-site and visib...
This mission involves electrical cabinet maintenance for a Brückner Extruder, BOPP type. The electrical cabinet, shown in Photo 1, is experiencing fre...
This mission involves motor replacement on a Brückner Extruder, part of an extrusion line. The old motors have been removed, and new motors need to be...
This mission involves a PLC upgrade for a Mesh Robotic Stacker. The current Siemens S7 PLC, visible in the photo with active indicator lights and conn...
Troubleshoot an IMA CNC Lathe experiencing frequent errors with its Siemens SIMATIC ET 200SP PLC module. The system includes a CPU 1510SP-1 PN, part n...